WHY INSULATE

You are here:

Home
Why Insulate

RECEIVE 10% OFF UP TO $100 FOR ANY AND ALL CUSTOMERS!

Barrier is aware of these trying times and we want you to know that we are all in this together. We could all use a break and keep our cool!

RESIDENTIAL INSULATION

COMMERCIAL INSULATION

INSULATION REMOVAL

WHY INSULATE YOUR HOME | INSULATION SOLUTIONS BY BARRIER INSULATION, INC. IN ARIZONA

There are many reasons why you should insulate your home, Heating and cooling account for 50 to 70% of the energy used in the average American home. Inadequate insulation and air leakage are leading causes of energy waste in most homes. Insulation:

Saves money and our nation’s limited energy resources
Makes your house more comfortable by helping to maintain a uniform temperature throughout the house, and
Makes walls, ceilings, and floors warmer in the winter and cooler in the summer.

The amount of energy you conserve will depend on several factors: your local climate; the size, shape, and construction of your house; the living habits of your family; the type and efficiency of the heating and cooling systems; and the fuel you use. Once the energy savings have paid for the installation cost, energy conserved is money saved – and saving energy will be even more important as utility rates go up.

THE 3 BIGGEST REASONS TO INSULATE YOUR HOME

CUTS DOWN ON ELECTRICITY BILLS

Saves you money and cuts down on the load our national power grid has to cope with.

MORE COMFORTABLE HOMES

Makes your home more comfortable, so when you get home from a hard day’s work, you don’t have a hard night’s sweat waiting for you.

ALL YEAR THERMAL PERFORMANCE

It makes it so that your walls, floor and ceilings are cooler in the summer and warmer in the winter.

DOES YOUR HOME NEED MORE INSULATION?

Unless your home was constructed with special attention to energy efficiency, adding insulation will probably reduce your utility bills. Much of the existing housing stock in the United States was not insulated to the levels used today. Older homes are likely to use more energy than newer homes, leading to higher heating and air-conditioning bills.

HOME ENERGY AUDIT

Purpose to identify any inefficiencies your home may present. Prior to making any home performance upgrades it is a good idea to perform an Energy Audit to identify possible duct leakage, unbalanced room pressures, air leakage, insulation levels and even test combustible appliance safety.

DUCT SEALING

All ducts must have mastic duct sealant at all connections at plenum and inside to make sure that all of the conditioned air goes into the home instead of the into an unconditioned area. Aero seal duct sealing also available by request.

AIR SEALING

This is done at all attic penetrations prior to adding insulation to ensure that we get the best performance out of the insulation and eliminate air leakage to attic space.

CAN LIGHT RETROFITS

Older can light housings were made to ventilate to attic for high heat producing incandescent bulbs. We can replace those leaky can lights with air tight can light cones once the bulbs have been changed to LED of CFL (low heat producing).

ATTIC ACCESS COVER AND DAM

Attic access if in the living space should have a dam to hold in the insulation in place when open and the backside of the Drywall should have 4” of foam board glued to it as a permanent insulator.

ROOM PRESSURE PASSIVE VENTS

All rooms with have a pressure measured in pascals of over 3pa should not be closed unless a passive vent is in place allow the air to move freely.

COMBUSTIBLE APPLIANCES

If furnace is located in the living space we can make sure that the furnace high low ventilation is not connected to living space therefore allowing conditioned air to escape to attic.

INSULATION RECOMMENDATIONS

Insulation recommendation based on Department of Energy Insulation chart of recommended insulation levels. This can be shown to customer by request. We’re always happy to help so contact us today!

FOAM INSULATION

Open Cell and Closed Cell Foam application available all sq. ft. pricing is based on total square foot plus pitch factor formula which includes garage divider wall in attic if applicable.

SHADE SCREENS

It is very important to keep out the radiant heat to all non-north facing windows. This will lower energy costs and help keep furniture from fading. Shade screen sales include screen, frame and installation. Colors booklet available by request.

RADIANT BARRIER PAINT

HeatBloc is an aluminum colored, water-based, low emissivity (low-e) coating. When applied to building materials such as plywood, OSB or plasterboard, HeatBloc lowers their surface emissivity to 0.25 or lower, thereby blocking over 75% of the radiant heat trying to enter the home. It is classified by ASTM as an Interior Radiation Control Coating (IRCC).

SAVE ON ENERGY, AND YOUR MONEY

Insulation Removal & Re-Insulation for Blown-In, Spray Foam, and Rolled Batt Insulation

Did you know that one of the single most important and cost-effective energy-saving building materials in a home is your insulation in your attic, walls and windows? The improper amount of insulation can cause many of the other energy-efficient components found in your home to perform less efficiently. Insulation can help provide monthly savings on your heating and cooling bills by keeping cool air out and warm air in during cold weather and the warm air out and cool air in during the summer months. Our professional and experienced team are dedicated to providing you with high-quality customer service. No matter how big or small your project is, we will offer exceptional craftsmanship and prompt, reliable service.

GIVE BARRIER A CALL TODAY FOR YOUR FREE IN-HOME ESTIMATE AND START SAVING MONEY TODAY!

Whether you are building a new house, or just need to remove the old insulation and install a newer more energy efficient option Barrier Insulation is Phoenix’s first choice in home and commercial insulation. Click here to schedule on our website, or just give us a call at 602-888-9510.